As the price of non-renewable energy continues to fluctuate, more and more homeowners are switching to renewable energy sources. And among the available renewable electricity sources, solar energy is the most abundant and affordable. Plus, the idea of cutting down the monthly electricity bill and increasing the value of the house has made many people turn to solar energy. And thanks to ever-evolving technology, the efficiency of solar panels has improved while their cost has decreased dramatically in the last few decades.
Therefore, switching to solar energy is one of the best ways to protect our environment and save some cash in the long run. And despite the change in solar panel technology, most of the tools for installing solar panels have remained the same over the last few decades. So here are some of the essential tools for DIY installation.
1. Digital Multimeter
The solar panel uses a photovoltaic system to convert light into electricity using semiconductors. Eco Peanut suggests that the right multimeter can help you confirm the quality of power being emitted by each cell. A digital multimeter combines the testing capabilities of an ohmmeter, ammeter, and voltmeter. This tool can also help with the maintenance and repair of solar panels.
2. Battery Operated Drill
Battery-operated drills may be simple, but you can be surprised by how many professional solar panel installers still use the corded drills. However, a battery-powered drill is portable, efficient, and powerful enough to handle all the drilling tasks on the roof. A battery-operated drill can make work easier while lowering the risk of falling off the roof.
3. Hack Saw
Remember, the solar panels will rest on some rails which you will install on your roof. Therefore, you will need to cut the rails before installing them or after you have finished installing the panels. A hack saw is affordable and easy to use, plus you can use it in your future DIY projects.
4. Flat Pry Bar
One of the less common, but very helpful tools for installing solar panels is the flat pry bar. Since most roofs have shingles, you will need a flat pry bar to help you slide the flashing under it. Remember, the mounts should be installed directly on the roof or beneath the shingles. Once you lift the shingle on the exact spot where you want to install your mounts, you can slide in the flashing and screw the mounts onto the roof and then add the rails.
Your set of screwdrivers is actually an essential tool that you will require during the installation process. And that is because the entire solar panel will be held in place on your roof by screws. So the first things you will need to tighten are the big screws locking the mounts onto the roof safely. The screwdrivers can come in handy during the wiring part.
6. Wire Stripper/Cutter
Once your panels are installed on the roof, you will have to either hire an electrician to help you with the wiring or do it yourself. So make sure you have the right wires stripper and cutter to help you with the wiring task. With the right stripper and cutter, you can finish the wiring job within the shortest time possible.
Solar electricity is clean, renewable energy that has reduced over-reliance on natural gas, coal, and oil for electricity production. And that is because it is environmentally friendly and has helped many households lower their utility bills.
However, the initial investment can be quite high for some homeowners. But its numerous benefits outweigh the pressure of paying high electricity bills every month. And one of the best ways to reduce the cost of the entire installation process is installing the solar panels yourself. So instead of hiring a professional to install the panels, why don’t you do it yourself? With the above tools, you can have your solar panels working in no time.
Facebook: Xinpuguang Solar Panel Instagram: xinpuguangsolar
Email address: Philip@isolarparts.com
Please click the picture to view the product details